My Flagpole Project

Started by NePaSmoKer, April 22, 2013, 09:24:27 AM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Print
Go Down Pages1 2
User actions

NePaSmoKer

April 22, 2013, 09:24:27 AM

The building phase.

PVC cut to 4'



T on the end cemented.



Cement the cut off 1' to the other end of the T.


Cut the other piece of pvc to 4' and cement the 45* to it.



Cement caps on each end of the pvc.


No cement on the lower part of the T. Drill 1/4" hole and use the bail pin.



Drill for the 2 eye bolts with clevice.



Hammer the 24" spike in the ground bout 12"



RED WHITE AND BLUE




Going to spray paint the pole white to cover the markings on the pvc. Got another to make for my POW/MIA Flag

iceman

#1
April 22, 2013, 10:08:08 AM
COOL :)

GusRobin

#2
April 22, 2013, 10:47:49 AM
looks good. One question - why the extra piece on the lower end of the T-joint (opposite the end where the flag is hung.)?
"It ain't worth missing someone from your past- there is a reason they didn't make it to your future."

"Life is tough, it is even tougher when you are stupid"

Don't curse the storm, learn to dance in the rain.

NePaSmoKer

#3
April 22, 2013, 10:59:54 AM
Quote from: GusRobin on April 22, 2013, 10:47:49 AM
looks good. One question - why the extra piece on the lower end of the T-joint (opposite the end where the flag is hung.)?

Counter balance. If you just used an elbow the front of the pole would just sag.

KyNola

#4
April 22, 2013, 01:12:58 PM
Very nicely done Rick!

iceman

#5
April 22, 2013, 01:30:37 PM
Quote from: NePaSmoKer on April 22, 2013, 10:59:54 AM
Quote from: GusRobin on April 22, 2013, 10:47:49 AM
looks good. One question - why the extra piece on the lower end of the T-joint (opposite the end where the flag is hung.)?

Counter balance. If you just used an elbow the front of the pole would just sag.

I knew that  ::) That's my story and I'm sticking to it  ;D

beefmann

#6
April 22, 2013, 04:02:06 PM
kool pole

Keymaster

#7
April 22, 2013, 05:55:01 PM
Nice job Rick, Always Glad to see your devotion to Patriotism!   

Quarlow

#8
April 22, 2013, 06:25:56 PM
Very cool Rick. Try some nail polish remover or acetone to take the print off the pipe. Should wipe off with that.
I like to walk threw life on the path of least resistance. But sometimes the path needs a good kick in the ass.

OBS
BBQ
One Big Easy, plus one in a box.

hal4uk

#9
April 22, 2013, 07:06:10 PM
Me likes it  ;D
No Swine Left Behind KCBS BBQ Team
Peoria Custom Cookers "Meat Monster"
Lang Clone - 'Blue October'
Original Bradley Smoker
MAK 1 Star General
Traeger Lil' Tex
Backwoods Chubby

NePaSmoKer

#10
April 23, 2013, 05:56:21 AM
Quote from: Quarlow on April 22, 2013, 06:25:56 PM
Very cool Rick. Try some nail polish remover or acetone to take the print off the pipe. Should wipe off with that.

Thanks Q, Didnt think of that.

wetzel1977

#11
April 23, 2013, 06:54:22 AM
Nice Flag mount Rick Proud to be a American !! For the  NASCAR's fans they  can also fly there favorite driver flags from it as well
BDS 4 rack
Custom Smoker  W/ BSG/ Auber pid controls
Cabelas 160L Dehydrator
Cabelas 1HP Grinder

NePaSmoKer

#12
April 23, 2013, 08:04:19 AM
Any standard 3x5 flag will work. These plans can be found online for free.

lumpy

#13
April 23, 2013, 08:40:06 AM
Beauty Eh!

You can change your flag every week. Drive everyone nuts.

NePaSmoKer

#14
April 23, 2013, 09:13:34 AM
Quote from: lumpy on April 23, 2013, 08:40:06 AM
Beauty Eh!

You can change your flag every week. Drive everyone nuts.


;D

I need a flag thats has EH on it.
Print
Go Up Pages1 2
User actions