Flashing "E" (error) and beep on Oven side

[RussSikes]

I'm getting a flashing E and constant beep from the oven side, can't set temperature or run it.  Any ideas what's wrong?

[Johnny]

Try unplugging the all the cables and plugging them back in firmly, I believe its the small one thats causing your problem.. may have got moved slightly. 

[RussSikes]

Thank you!  I appreciate your help. 

I did find the problem, and of course feel stupid.  I had left some bisquettes in the wood chamber, and I think the bottom one was probably partly cooked and therefore misshapen, and it jammed the puck feed.  I cleared it and the controller lit up normally.  A novice problem, which is good, since I'm new at this!

Thanks again,
Russ Sikes
Plano, Texas

[Edward176]

Quick and simple Fix. Welcome to the Forum.

[Johnny]

Thank you!  I appreciate your help. 

I did find the problem, and of course feel stupid.  I had left some bisquettes in the wood chamber, and I think the bottom one was probably partly cooked and therefore misshapen, and it jammed the puck feed.  I cleared it and the controller lit up normally.  A novice problem, which is good, since I'm new at this!

Thanks again,
Russ Sikes
Plano, Texas

Glad your up and running Russ! Welcome to the forum btw.
Johnny.

[Smoker John]

Welcome to the forum Russ

[cherrybergher]

Welcome to the forum