• Welcome to BRADLEY SMOKER | "Taste the Great Outdoors".
 

2nd Element & Auber WS-1211GPH - setup query

Started by mpneumann, November 11, 2018, 04:26:18 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

mpneumann

Hi,

I just modified my Bradley digital 4 rack smoker... I added a second 500 watt heating element.  I know I need to run auto tune (i have an Auber WS-1211GPH). 

Do I need to make a change to any other PID settings (like changing 500 watts to 1000 watts)?

Thanks,
Michael

Toker

500 watts P=70 ( or 7 ) depending of your pid.
1000 watts P=140 ( or 14 ) depending of your pid.


Envoyé de mon iPad en utilisant Tapatalk

mpneumann

Thanks I'll try that.  I've run the auto tune and I'm getting frustrated.... the pid holds the temperature perfectly at about twenty degrees below what I set it to!   If I set it to 250, it heats to 230 and stays there. If I set it at 275, it holds around 250.  Frustrating!

Toker

With these settings, I have about 2-3 degrees difference


Envoyé de mon iPad en utilisant Tapatalk

mpneumann

I'll try your p value.  Any idea why it's staying 20 degrees below set value?  Seems weird

Toker

No sorry, I've only tried what I've been told and it worked out good.

mpneumann


Toker

All I can say is that my vent is wide open and my ambiant probe is always under the lowest rack of food. Make sure no wind or at least as possible.


Envoyé de mon iPad en utilisant Tapatalk