Author Topic: Smoker not turning on  (Read 263 times)

Offline GregMatzel

  • Newbie
  • *
  • Posts: 1
Smoker not turning on
« on: October 18, 2021, 03:33:21 pm »
MNY smart smoker has electric and the touch screen power button is showing, but when I press it the unit does not turn on. Any suggestions? Is the touch display fired? Please help.

Offline Habanero Smoker

  • Member Extraordinaire
  • ******
  • Posts: 15,163
  • KCBS - Master Certified Barbecue Judge
Re: Smoker not turning on
« Reply #1 on: October 19, 2021, 03:07:22 am »
Hi GregMatzel;

Welcome to the forum.

There is not much information on this forum about the Smart Smoker. You may want to contact Bradley.

In the mean time, make sure that the Child Lock is disengaged. Refer to your manual, and follow the instructions on the sequence on how to hookup your cords.

Here are the instructions from the manual
1. First plug sensor cable (1) into the back of the generator (A) and smoker (B).

2. Plug short jumper cord (2) into the receptacles in the smoker (C) and generator (D).

3. Plug the long power cord (3) into the power receptacle in generator (E).

4. Lastly plug the long cord (3) into a wall outlet (4). (Extension cords should be for outdoor use and the connection to the extension cord should be dry and off the ground).


     I
         don't
                   inhale.
  ::)