• Welcome to BRADLEY SMOKER | "Taste the Great Outdoors".
 

Bradley Smoker FAQ's

Started by Habanero Smoker, August 06, 2008, 03:21:31 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

car54

I also agree that there is some A1 information and it is presented in a professional way. I just bought my daughter a Bradley and I printed out anything that she would need.

Thanks much to all involved.

Brad

Wildcat

I too like what has been done with the site.  Thanks guys.
Life is short. Smile while you still have teeth.



CLICK HERE for Recipe Site:  http://www.susanminor.org/

carnie1

#17
Quote from: carnie1 on August 08, 2008, 09:12:34 PM
Quote from: Habanero Smoker on August 08, 2008, 02:00:51 PM
Quote from: carnie1 on August 08, 2008, 07:53:04 AM
Looks good, great job, just looked at a few and noticed on the bbq guru digiq setup for the dbs you state to set the temp around 300 but in this setup the right side  of my DBS is off/inoperable with the digiq hooked up as the raptor controls the temp or am I missing something?

Thanks for that information. I have the OBS and you have to set the temperature all the way to the right for the element to work so that the Raptor can control it. So if I read you correctly, you do not have to set the oven temperature at all.

So as soon as I get clarification on that, I can change it.
I also have the setup on a Stainless Bradley with a slider in  FL but just set up the DBS up north recently, gonna set up again next week and will look at my setup a little closer ( out here on the road with the carnie, don't get to use it every week)

I have everything setup today out here at the carnie and thought I would put this diagram together ,Hab feel free to modify this and if anyone else has input feel free. I hope the picture is big enough to read if not let me know and I will send anybody who wants it direct.


Habanero Smoker

Carnie;

Thanks. Did you get a chance to see if the oven temp needs to be set for the Digital? If not, then does the sensor cable need to be attachted when you have the DigiQ II setup?

The photo is difficult to read. So if you can send me a copy of a larger photo or individual photos that would be great.



     I
         don't
                   inhale.
  ::)

carnie1

I did turn the oven side on but it seemed to knock off the Raptor but since plug #2 is not hooked up as indicated by the blue X I'm not sure if it did anthing at all, The sensor is hooked up as indicated by the black line. I reupped the photo to a larger resoloution, PM me with your email and I'll send you the file direct.

Carter

Thanks Habs, Olds, and everyone else who contributed.

Another fine example of how good this forum is.

Carter

Oldman

Quote from: Carter on August 15, 2008, 09:59:20 AM
Thanks Habs, Olds, and everyone else who contributed.

Another fine example of how good this forum is.

Carter
N/P but that will be $5.00 please~~!
Olds

Click On The Portal To Be Transported To Our Time Tested And Proven Recipes~~!!!