New Bradley Smoker

Started by Bradley (Head Office), January 15, 2012, 09:27:12 AM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

SouthernSmoked

That sound awesome Toker.

Enjoy and remember to share!
SouthernSmoked
WeQ4u - BBQ Team

KCBS CBJ
(2) - Stainless Steel 4 Rack's with Dual probe PID
1- Digital, 6 Rack
1-PBS
(2) Bradley Cold Smoke Attachment
(2) Backwoods Smokers
(1) Chicken Little

TedEbear

Quote from: Toker on January 18, 2012, 06:03:23 AMP.S. THX Brian and Bradley technologies for this present

Present?  They gave it to you?


mlp311


Toker

Yes they did, as a kind of reward for my tattoo  :D

squirtthecat


Very cool!     Fire that baby up......

Toker

Sorry Squirt, but it is not moded yet and not mounted on the table, i will need my friend and to add more, outside it is snow storm with ALLOT OF WIND so...  :P

squirtthecat


Good day to stay in with a hot cup of coffee, then!

Toker

With my new Bradley cup  ;D

mlp311

If you get a tattoo of my wife, I'll send her to you for free too!  ::)

mikecorn.1

Quote from: mlp311 on January 18, 2012, 10:12:00 AM
If you get a tattoo of my wife, I'll send her to you for free too!  ::)
Now that's some funny sh!t. :D


Sent from my iPhone using Tapatalk
Mike

devo

Quote from: mlp311 on January 18, 2012, 10:12:00 AM
If you get a tattoo of my wife, I'll send her to you for free too!  ::)

Hey
Watch out
I have a few x's I can send also.

Toker

mlp so funny and devo, i like the emoticone, guess now everobody know my passed life :)

Toker

#27
OK jokes are over here some info asked earlier in this topic;

YES YOU CAN COLD SMOKING EXACTLY LIKE THE BLACK ONE BTIS1

No sensor plug and or cable needed. You need to plug the tower into smoke generator and turning on the dial  to start the element or plugging it into a pid. I guess the pid is the only option if you want to turn off the smoke generator after the smoke is applied because, if you turn off the smoke generator it turn off the element. But without pid, it's still low medium high knob that your turn instead of sliding this time.

The front feet look more stable at least it is more stable than my BTIS1.
I did not see how to open the smoke generator easier than the other but i did not take too much time on it.

The interior has improve. Looks nicer but still the same cheap plastic on top and bottom of the door. Don't let the draw fooling you.

The back wall outside still looks the same. Still too thin to support the fan.

The main difference seems to be the racks support. A kind of rail on top and bottom that you insert the rack in the middle of the support so there is a rail on top and bottom of each racks. So somebody has to say Cogent he must redesign his rack kits lol! And the space between the V-tray and the lowest rack seems to be a bit smaller too so if you buy to mod check this out before drilling the holes for the fan.

So so far it's about it. So if more info needed just ask Toker.

Toker


viper125

Well can you still use a cold smoke box?  If you set it lower and use the hose how will the tower still work? Or do you mean to use ice when cold smoking?
A few pics from smokes....
http://photobucket.com/smokinpics
Inside setup.