Finally have some great weather for smokin. BS comes out da garage to da deck ;D
(http://i123.photobucket.com/albums/o290/stlthy1/PICT0346.jpg)
Them GH fatties at the ready with some maple pucks a-burnin ;D
(http://i123.photobucket.com/albums/o290/stlthy1/PICT0345.jpg)
nepas
Looks like you have a Maverick ET-72. If so, they are nice to have. A lot of bells and whistles packed into them.
HB
Thats my old acurite digi probe. I have an et73 but dont use it much.
nepas
I have the same one NePa. Only thing is, I don't use it much anymore since I have the Polder dual probe and the ET-73. The probe jack is flaky and now it occasionally switches between F and C randomly.
Quote from: Gizmo on April 20, 2007, 05:48:13 PM
I have the same one NePa. Only thing is, I don't use it much anymore since I have the Polder dual probe and the ET-73. The probe jack is flaky and now it occasionally switches between F and C randomly.
This is my last acurite out of 5 that i have had. So far its holding up. Going to do the mod on my et this weekend.
Also the GH Fatties are done ;D and out of the bs just now ;D
(http://i123.photobucket.com/albums/o290/stlthy1/fetty.jpg)
nepas
maybe crumbled ghfaty with gravy over bisquits ;D
nepas®
Nice pics. Still waiting for the VPN wormhole tunnel to move fatties throught the ether. I am ready on my end with the laser-pumped flux compression generators.
Arcs_n_Sparks
Quote from: Arcs_n_Sparks on April 20, 2007, 06:22:00 PM
Nice pics. Still waiting for the VPN wormhole tunnel to move fatties throught the ether. I am ready on my end with the laser-pumped flux compression generators.
Arcs_n_Sparks
Mybe if i put my speedo back on and go out back and do the jig a VPN wormhole might open up :D :D :D
nepas®
:D :D :D there is a thought for the smoker cam, :-\ ??? not a good thought :-X ;D
I'm now on my desk top and now can see it better. I often still use the Maverick ET-73 if I have multiple pieces or meat to monitor. I purchased an extra temperature probe, so with the ET-73 I can monitor two pieces of meat. The ET-72 I purchased, because it was too good of a deal to pass up. It's a real nice gadget.
Habs
I did not know the ET73 would work with two meat probes. ??? Will the ET 72 work with the oven probe ???
I have one of each. Never tried it but sure seems to be the way to go!
Nepas , You'll be the first smoke featured on TMZ. :o....then look-out Hollywood ! 8)
Coyote
Quote from: coyote on April 21, 2007, 11:09:42 AM
Nepas , You'll be the first smoke featured on TMZ. :o....then look-out Hollywood ! 8)
Coyote
;D ;D
Hollywood................................................thats a.................→ nice town ;D
nepas
was at Cabela's in Mitchell SD. they had a Maverick Redi Chek ET-73 for $49.99, it's also listed in there spring camping catalog for the same price. there is now one here now.
Great Nepas!, your BS looks proud sitting there in the sunshine ;)
Quote from: West Coast Kansan on April 21, 2007, 08:35:34 AM
Habs
I did not know the ET73 would work with two meat probes. ??? Will the ET 72 work with the oven probe ???
I have one of each. Never tried it but sure seems to be the way to go!
Yeah! You can monitor two internal temps, if you have two temperature probes. The only restriction I've found in doing this, is if you need to set two different temperatures, the highest temperature setting has to set on the meat probe connected to the smoker connector. This is necessary, because the ET-73 will not allow you to set the meat temperature higher then the smoker. The probe from you ET-72 will work with the ET-73. I had purchased an extra probe before I purchased the ET-72. If I had the ET-72 earlier I wouldn't have needed to buy the extra probe.
Thanks Habs, will buy some batterys for the 72 ... 8)
I thought I smelled something coming from over the hill out here today ;D
Quote from: West Coast Kansan on April 21, 2007, 04:58:14 PM
Thanks Habs, will buy some batterys for the 72 ... 8)
I've found that most of the probes are interchangeably. I just remembered one other limitation. If you use the ET-73 to monitor two meat temperatures, the probe that is hooked up to smoker connection cannot be set lower then 140°F, but that should cause any problems.
Habs, good info - thanks, it is probably just me that did not know and never tried it. I like the high rack and low rack being monitored with the same device. ;D
This may be good to move out onto a seperate thread. ??? Thanks
Tomorrow I'll post a thread under accessories.
keeps my stinking probes sorted better too. ;D Did some loin chops - thin cut for sandwiches today. 72 for cabinet was great. Thanks :)