My 6 rack is now a 18 rack

[stinger]

Im pushing it... do you have part numbers and how disd you connect power to fans

[OU812]

I'll have to look for the part numbers, got them at Grainger Industrial Supply.

The power is conected in the center switch box then a cord goes to the power strip thats mounted to the wall. You can see the cord in the pictures, one for the generator, one for the PID and one for the fans.

[OU812]

Ok I searched the Grainger site and now I'm ready for a shot.

Man theres ALLOT of motors there.

I'm goin home to see if I can find the paper work to make sure I have the correct number.

I will be back.

[stinger]

thx still a little bit oblivious to the power wiring though

[OU812]

Ok here is the motor you will have to remove the mounting studs and use #8-32 screws to mount the motor from the back to the electrical box. The box is mounted to the angle and the angle is mounted to the smoker.

Here is the fan you will need 2 blades per motor. One inside the smoker and one outside the smoker to cool the motor. I couldnt find the exact blades I have but these have the same specs as mine.

Good luck