Here's a silly question....

[steve-o]

When the puck advance button is pushed, does that reset the timer to 20 mins? I've never really paid attention to it, and was gonna try some cheese so I was just gonna advance them onto the burner but wanted to make sure I would get the full burn. Also if I am only going to use the top 2 racks, is it best to put my digital thermometer on the rack below or on the lowest rack I am using. Thanks

[beefmann]

if you  push the puck advance and it cycles , yes it does reset to 20 mins

[bears fan]

Yes it resets the twenty minutes when you advance the pucks.  You are planning on cold smoking the cheese, right?

[steve-o]

if you  push the puck advance and it cycles , yes it does reset to 20 mins

Yes it resets the twenty minutes when you advance the pucks.  You are planning on cold smoking the cheese, right?

Ok cool I figured it should but just wanted to make sure. Ya cold smoking it, but I dont have the cold smoke adapter, but hope it will work

[Habanero Smoker]

............. Also if I am only going to use the top 2 racks, is it best to put my digital thermometer on the rack below or on the lowest rack I am using. Thanks

Attaching the probe to a rack below would be the best way to do it if you are rotating racks. That way you don't have to unclip and reattach the probe when rotating.

[grnhs]

you will probably have to prop the door open slightly to keep the cabinet cool enough, I found that even at 10* F the smoke generator was a bit hot for cold smoke. I tried to hold it around 80-85*.

[RossP]

Steve if you are worried about the temp , put a pan of ice on the bottom rack and leave the main element un-plugged.

Ross

[OU812]

I have the DBS and pushing the advance button does not reset the 20 min timer.

Just throwin this out there