will not heat above 125 degrees

[BLAZDOG1]

not sure if the heating element is not working properly or maybe the temp. slide control is not working properly, are there common replacement parts for the Bradley smoker I couldn't find anything on the Bradley home page. Any help would be greatly appreciated. I hate not being able to use my smoker.

thanks from the toooo cold smoker

[GusRobin]

make sure all the plugs are seated properly. Unplug and replug all the plugs pushing firmly and mving it a bit as you push. If this doesn't solve the problem, try plugging the caabinent directly into the wall to see if it works.

Also, move the slider back and forth a bit.
Also, is your vent open?
Try the above and see what happens.

[RAF128]

This kind of thing has been mentioned several times lately.   I had that problem too last year when I got my 6 rack DBS.   I found that there was a loose connection inside the smoke generator.    Open the generator and check the connection.   Remember to take out the perimeter screws and the not the ones in the center.   

[Habanero Smoker]

Here is a link to help you trouble shoot:
Bradley Smoker FAQ's

It appears the element is not working. After trouble shooting and finding out what the problem is and if you need parts; if your smoker is less then a year old Bradley will send you the parts. If it is beyond your warranty Yard & Pool sells replacement parts.