SM overhaul

[lumpy]

Hey guys.
I like to overhaul my SG and last time I did this was outside plugged into the BDS.
I like to do this inside on my workbench but when I plugged the SG into AC all I got was E flashing. Think I remember this happened to me last time that's why I plugged it into the BDS.

Is there a way that I can bypass all of this? Main reason to overhaul is to check the gears and micro switches. Can't do this without AC.

Thanks
Lumpy

[OU812]

For the SG to operate properly it needs to have the small sencor cable plugged in to the cabnet. Thats the E code, no cabnet. You can make a bypass plug by using a plug that fits the SG and trick the SG with a 100 K ohm resistor.

[KyNola]

Lumpy,
You got a Bradley cold smoke box?  It came with the plug that tricks the BDS into thinking it's hooked to the tower.

KyNola

[lumpy]

I do now.
Someone just offered to give me one of their spare dummy plugs.

Thanks guys!
Lumpy

[OU812]

I do now.
Someone just offered to give me one of their spare dummy plugs.

Thanks guys!
Lumpy

Good deal.

Thats what makes this place so great, always helpin a brother out.