Smoke Generator and Cold Smoke adapter Question

[Jim O]

Where would one get the longer cords needed for this set-up ?

Jim O

[Mr Walleye]

Jim

If you are referring to the sensor wire for the Digital Smoke Generator, you can simply splice the amount of wire into it. It is a Thermistor and not a Thermocouple type sensor so it doesn't matter what wire you use. I used some small automotive speaker wire to extend mine. You can also buy the correct connectors at Radio Shack and make a completely new longer one.

Another option is to use a bypass plug. It's simply a connector that you plug into the sensor hole on the Digital Generator and makes it think the sensor is connected and allows the unit to run properly with the exception of the temp display will be fixed at one temp. Here's a link to how to make one.
http://forum.bradleysmoker.com/index.php?topic=9164.15

I opted to lengthen the wire so the temp display was still functional.

Mike

[Jim O]

Thanks Mike

I like the idea of splicing in a length of wire.
I also like the temp to be displayed.

Jim O