• Welcome to BRADLEY SMOKER | "Taste the Great Outdoors".
 

What size casings are the Tillamook snack sticks?

Started by Cope30tyee, March 01, 2011, 07:05:04 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Cope30tyee

Guys,
I want to make snack sticks similar to the Tillamook snack sticks they sell at the grocery store.  They are fairly then and I like it that way. What mm casings are they using?

NePaSmoKer

Quote from: Cope30tyee on March 01, 2011, 07:05:04 PM
Guys,
I want to make snack sticks similar to the Tillamook snack sticks they sell at the grocery store.  They are fairly then and I like it that way. What mm casings are they using?


Most of the large commercial makers can get 15mm collagen casings. Private folks can if you hunt for them but they are pretty expensive. If you want smaller diameter casings 17mm are avail at most of the online sellers.

Cope30tyee

Thanks nepa.  What is the largest diameter stuffing Nozzle/tube I could use to stuff a 17 mm casing?  Would a 3/8 inch fit? Or would I have to get a 10 mm one?

NePaSmoKer

Quote from: Cope30tyee on March 01, 2011, 08:56:22 PM
Thanks nepa.  What is the largest diameter stuffing Nozzle/tube I could use to stuff a 17 mm casing?  Would a 3/8 inch fit? Or would I have to get a 10 mm one?

3/8 should fit, you might have to pull the casing onto the tube.