Puck Loader won't stop

[nak983]

Can anyone tell me why the puck loader will not stop loading pucks? I have checked the load button, that is not stuck. Any other possible explanations?

[TMB]

I had the same thing happen at 5am one cold A$$ morning and found wood chips had fallin into the gear/mech that works the puck feeder.  I blew it out and have not had the problem since, I hope this helps 

[mikecorn.1]

I had the same problem. I fixed it by replacing the micro switch.


Sent from my iPhone using Tapatalk

[cajunboudreaux]

I had the same problem as well. Wood Chips had fallen and made a mess. I took the screws out of the box and cleaned it out. It worked fine for years after that.

[FLBentRider]

My advance button sticks too.

[Habanero Smoker]

I had the same problem. I fixed it by replacing the micro switch.


Sent from my iPhone using Tapatalk

It also my be an adjustment of the motor, to make sure the switch is being depressed enough.

The below link is generally for an "E" error on the Digital models, but the adjustment of the motor still applies to the OBS as well.
Motor Adjustment