Auber plug-n-play

oldsmoker · February 25, 2012, 08:29:46 PM

Need help. was doing sausage and went out about 2 hours later and pid display was blank. checked all cords tryed again still nothing. any help out there? Thanks

mikecorn.1 · February 25, 2012, 08:35:45 PM

Have you tried the fuse on the back
Of it?

Sent from my iPhone using Tapatalk

devo · February 25, 2012, 08:37:37 PM

There is a inline fuse at the back of the unit. You might have to pull what looks like a plug to get at it. I also believe there is a spare fuse in there also. Maybe the fuse is shot.

oldsmoker · February 25, 2012, 09:02:32 PM

Fuse is good. If i hold the set button and press the temp button at nsame time display shows but when i let go no display.

mikecorn.1 · February 25, 2012, 09:13:17 PM

Sorry, unless someone has anything else, I dont know what else it could be. Looks like you might have to call Auberins monday morning. :'( Good luck. :)

oldsmoker · February 26, 2012, 07:24:49 AM

Dont know what the problim was . Always keep pid in the house hooked it up this morning and running great. thanks for the help.

viper125 · February 26, 2012, 07:31:38 AM

Maybe needed a day off! ::)

Keymaster · February 26, 2012, 08:05:51 AM

I heard they dont like cold weather, what was the temp outside?

oldsmoker · February 26, 2012, 08:16:23 AM

When i took it out house this morning and hooked it up and set it for 160 and it started out at 60 and i watched it clime up. checked later and it went to140 and went out about 30min later and no lights on the paid. Guess will have to call this week any body have the phone number Thanks

mikecorn.1 · February 26, 2012, 08:22:22 AM

Quote from: OldSMOKER on February 26, 2012, 08:16:23 AM
When i took it out house this morning and hooked it up and set it for 160 and it started out at 60 and i watched it clime up. checked later and it went to140 and went out about 30min later and no lights on the paid. Guess will have to call this week any body have the phone number Thanks

Tech support: 770-569-8420, 404-291-6298
Office hours: 9am - 5pm US EST Monday through Friday.
These phone numbers are for technical support only

Keymaster · February 26, 2012, 11:20:00 AM

read this thread as it may be some help, maybe put your PID in a box. Not sure what your outside temp is

http://forum.bradleysmoker.com/index.php?topic=8358.msg96930#msg96930

oldsmoker · February 26, 2012, 12:14:34 PM

Keymaster thanks for the help. I keep pid in house and my smokers in my garage and vented out.

Auber plug-n-play

devo

Keymaster

Keymaster