Weird Temperature Readings - HELP!!!

[SmokeBomb]

I have an older model SS Bradley that I have been using for years with the Auber WS set up that was, once upon a time, state of the art. I did a run of 'Turds last week and the thing took almost four hours to come up to temp.
I started a couple of butts about two hours ago at with the Auber set at 210. I didn't do a full warm up, I put the butts in as soon as the temp started coming up. I know, I know it was wrong not to let it get to 210 before I put the butts in.
While the box thermometer and the remote indicate the box is at 209, the Auber says it is running at 139.
I have checked all the connections and everything is tight. I have never had problems before the last two runs...Any ideas?
Thanks for your help.

[GusRobin]

Are the different probes close to each other?

[devo]

Just for the heck of it jiggle the auber connection where it plugs into the controller. I had one probe that if it didn't sit just right in the connector it would give a false reading.

[viper125]

Well the plug or a wire or soider joint is bad. Take cover off and check.

Sent from my DROIDX using Tapatalk 2