Hot Plate

[DaveT261]

What is the best way to remove burnt puck residue from the puck burner plate

[Salmonsmoker]

I use a sharp putty knife(sharp square edges, not sharpened like a knife) and then an 80 grit sanding sponge.

[Saber 4]

I use a sharp putty knife(sharp square edges, not sharpened like a knife) and then an 80 grit sanding sponge.

I use a putty knife and canned air on mine after every smoke so that it doesn't build up real bad.

[tskeeter]

Dave, I scrape the residue off with a putty knife, then polish with a green scotch brite pad after almost every smoke.  I think rubbing alcohol will dissolve residue, also.

[Habanero Smoker]

After the plate has cooled down, for cleaning I use a brass brush, some isopropyl alcohol, and wipe clean with paper towels. Though pieces of Scotch Brite pads also do a good job.

[slowpoke]

I get the wife to use a razor window scraper,The kind you use to clean the soot off the glass door of the wood stove.She says it works great.lol ;D

[DaveT261]

Thanks a bunch.  I was afraid of damaging the hotplate.

[Jkwellborn]

I use a putty knife and canned air on mine after every smoke so that it doesn't build up real bad.

I do the same.