Digital smoker temp display flashing and beeping with various temp display

[Karlos1969]

 
Hi guys newby here
My smoker has decided to not display correct temp in smoker..instead it flashes various temps and makes a clicking noise as it jumps from 165c,0c and a few other numbers in between..
Previously I did have a E code which wouldn’t allow it to do anything which I think was poss a jammed bisque feed but has since rectified itself as I swapped my controller with a mates and it worked without issue on his smoker then I reinstalled it back on mine ..
Cheers in Advance

[Habanero Smoker]

Hi Karlos1969,

Welcome to the forum.

If your generator worked fine on your friends Bradley, and if you did not use your short cord when you swapped out the generators, i would guess the problem is with your short jumper cord, or the jumper cord connector on cabinet. Clean the plug ends, and connector with an electrical contact cleaner. You could use WD40, but that tends to leave a residue that can collect dust and other debris. If that doesn't work, the problem is most likely your cord, and it will need to be replaced.

Let us know how your problem was resolved.