Author Topic: Smoke Generator BTDS108P died  (Read 324 times)

Offline Smokeville

  • Sr. Member
  • ****
  • Posts: 767
Smoke Generator BTDS108P died
« on: September 02, 2021, 08:39:07 am »
Hello all,

After 10 years or so, my smoke generator has quit on my 6 rack digital. The Bradley site only shows a BT611 available. I use an Auber, so I'm not concerned about the digital connection, I just want to generate smoke.

Will the BT611 fit?

Thanks, Rich Chambers

Offline Toker

  • Hero Member
  • *****
  • Posts: 1,197
Re: Smoke Generator BTDS108P died
« Reply #1 on: September 02, 2021, 10:39:54 am »
It will for sure but for more security just bypass the slider bar below the door of your smoker if it’s still working if not, run it as usual with the new generator.

Offline Smokeville

  • Sr. Member
  • ****
  • Posts: 767
Re: Smoke Generator BTDS108P died
« Reply #2 on: September 04, 2021, 10:16:54 am »
Thanks, Toker.

I have the digital 6-rack and I've ordered the new generator. Of course, right after I ordered it, the old generator started to work. It seems that during our recent move the puck heater arm got a bit bent. But I'll keep the new one just in case the old one is unreliable.

Rich

Offline Toker

  • Hero Member
  • *****
  • Posts: 1,197
Re: Smoke Generator BTDS108P died
« Reply #3 on: September 04, 2021, 10:30:13 am »
Good!

Offline tbronder5

  • Newbie
  • *
  • Posts: 20
Re: Smoke Generator BTDS108P died
« Reply #4 on: September 13, 2021, 07:31:42 pm »
Thanks, Toker.

I have the digital 6-rack and I've ordered the new generator. Of course, right after I ordered it, the old generator started to work. It seems that during our recent move the puck heater arm got a bit bent. But I'll keep the new one just in case the old one is unreliable.

Rich
Hey I just ordered the Auber PID 1200 series and it controls both the oven and the smoke generator may be another option.

Sent from my SM-G996U using Tapatalk