Maverick ET-73 statement/question

Started by Junk Yard Dog, April 09, 2007, 02:54:13 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Junk Yard Dog

I just bought the Maverick ET-73 thermometer.  The on/off switch for the transmitter is inside the battery compartment and it takes unlocking the turnkey thingie to turn it on or off.  How smart is that ? I originally thought I would just keep it on, but found out that if you don't turn it on AFTER turning on your receiver, it won't work.

I am thinking of throwing away the battery compartment cover lock and rubber banding it to the transmitter unit.  Am I missing something?  Thanks for any advice.
Gary in Texas

Mr Walleye

Hi JYD

The reason it is setup that way is to make it more waterproof. The switch is not waterproof thats why it has a seal on the cover as well. It's certianly mot the easiest thing to turn on but it does the job. I find if you turn the transmitter on first then immediately turn the receiver on seems to work the best for me.

Mike

Click On The Smoker For Our Time Tested And Proven Recipes


Junk Yard Dog

Ah, thanks Mike.  That makes sense. I have mine in the garage, so I'm not worried about rain.  I think I'll do what I said (but keep the parts in a bag).  Thanks for cluing me in.
Gary in Texas

Wildcat

Life is short. Smile while you still have teeth.



CLICK HERE for Recipe Site:  http://www.susanminor.org/

IKnowWood

At 90 to 100% humidity I can see that being an issue. But if its that humid, GFCI will be going off...

Mid-Atlantic area at 75% humidity its not an issue.  But its also sweating weather.

I keep telling myself to just leave the cover off, but then I don't  don't know why.  Must be mental programming.  A lid must be closed, it it looks like a seal, close it.

hmm, imagine the anarchy if we all forget to close doors that should be closed, in hot humid wet weather, in a sweating time of year. 

I really don't know where that was going.
IKnowWood
Coming to you from the DelMarVa (US East Coast that is)

Look up Our Time Tested And Proven recipes

IKnowWood

Sorry I realized where I was going with that.

The ET-73 bugged me that I just decided to be lazy and just use a ET-71.  One one probe, I don't need cabinet temps with my TS so all I need is IT temps.

With multiple meat, I end up going the extra effort and use it.

I might end up getting one of those new Polder units that look cool.  I only really need one remote.
IKnowWood
Coming to you from the DelMarVa (US East Coast that is)

Look up Our Time Tested And Proven recipes

Junk Yard Dog

IKW,

I found the temperature displayed on my Bradley was about 30ยบ different than my ET-73.  The ET73 showed it was cooler than the Bradley.  NOW, I am going to have to get another thermometer to see which one is correct!  ???
Gary in Texas

NePaSmoKer

I dont even use my 73 anymore :o

nepas

smokin stu

I had always thought it was a dumb design to have the switch inside the battery compartment, but I did not think of the weather-proofing.

Thanks for the insight.

IKnowWood

JYD   I don't use the built in temp switch.  I have a Temperature Switch, like a PID but not as conplicated that has is own sensor that is dropped into the smoker thru the vent and set bout center in the box.  It gives me a good reading of what the product is seeing.  The switch is programmed to turn on and off the Cabinet temperature based on criteria of set point and such.  It works great for me to sleep during a long smoke.

My ET I am indeed going to use in the Portable Bradley, its already in the bag for its first use on the road coming up in the next 2 months.  I used it at home on the maiden BPS usage in the fall.  The BPS does not have a temp device to the ET-73 us needed there.
IKnowWood
Coming to you from the DelMarVa (US East Coast that is)

Look up Our Time Tested And Proven recipes

Gizmo

I think the WCK cut an opening in the door to access the switch, so if water proofing is not a concern, that could also be an option.
Click here for our time proven and tested recipes - http://www.susanminor.org/

West Coast Kansan

Yes I did.  Since the reciever needs a toothpick to turn the switch on and off do to the black part of the switch coming loose - I do the same thing with the xmitter now. 

It never rains in southern california.   ;D

Click On Link For Our Time Tested And Proven Recipes and Register at this site for Tuesday Night Chat Room Chat is FUN!

NOW THAT'S A SMOKED OYSTER (and some scallops)

Gizmo

Yah but now you can't take it with you in the pool. 
Kicking back on the water lounger, beer in hand,  8) shades on the eyes,
"Yes dear, I am busy checking the temperature on the smoker.  Don't want the dinner to over cook you know.  I'll take care of that later when I am not so busy."  Paddle, paddle, paddle.
Click here for our time proven and tested recipes - http://www.susanminor.org/

Habanero Smoker

As Wildcat stated, don't forget about humidity. If you place the transmitter on top of the BS near the vent the humidity is going to be in the 80's or 90's. When I use my ET-73, I place it on top of the BS and condensation often forms on it.



     I
         don't
                   inhale.
  ::)

Junk Yard Dog

Quote from: Habanero Smoker on April 10, 2007, 02:25:46 AM
If you place the transmitter on top of the BS near the vent the humidity is going to be in the 80's or 90's. When I use my ET-73, I place it on top of the BS and condensation often forms on it.

I don't understand.  Why are you all putting the ET probe down the vent?  I place it on the middle rack and then let the wires come out the door.  I put the transmitter on the digital smoke box.  Is that wrong? 
Gary in Texas