New Bradley Smoker

Toker · January 20, 2012, 02:47:01 PM

And tell me if you can register the warranty. Yesterday, when i tried, the system told me serial unvalid.

mlp311 · January 20, 2012, 02:49:41 PM

It did take me a minute to figure out the three pins that hold the v tray. I think that's why they did three so that its impossible to put the v tray in the cabinet upside down.

Sent from my DROID3 using Tapatalk

Toker · January 20, 2012, 02:53:58 PM

Because me at 1ST i put it the wrong sens.

mlp311 · January 20, 2012, 02:58:55 PM

There she is. I like it. As toker said, if there isn't anything wrong with the OBS you have, I don't think there is any reason to rush out and get the new. I like the few changes that were made, and can't wait to fire her up. I mean cook something. The whole fire thing didn't work to well for me last time. Haha. Trying to blacken a brisket inside of a OBS does not work very well. :)

Sent from my DROID3 using Tapatalk

mlp311 · January 20, 2012, 03:01:04 PM

Ill let you know about the warranty Toker. The offer on the wife still stands too whenever you are considering your next tattoo.

Sent from my DROID3 using Tapatalk

Toker · January 20, 2012, 03:08:13 PM

;D ;D ;D

mlp311 · January 20, 2012, 03:09:52 PM

What's this item on the back wall of the cabinet? Its about half way up.

Sent from my DROID3 using Tapatalk

FLBentRider · January 20, 2012, 03:12:39 PM

Quote from: mlp311 on January 20, 2012, 03:09:52 PM

What's this item on the back wall of the cabinet? Its about half way up.

I would think it is the high-limit sensor.

Toker · January 20, 2012, 03:16:55 PM

Absolutely. It is attached to the in-line thermal fuse that cut the power in case of over heating.

mlp311 · January 20, 2012, 03:22:58 PM

Now I know.

Sent from my DROID3 using Tapatalk

Toker · January 20, 2012, 03:27:24 PM

If you ever add a 2ND elements, you need to add a 2ND of it too with the orange cord (fuse) and it means to drill a 2ND holes next to the first if or when you have a pid. The good news with this new OBS, there is no face plate to passby, only plug the element into the pid.

squirtthecat · January 20, 2012, 03:57:39 PM

Looks like those new brackets will make it easier for the guys who flip extra racks over to hold larger loads of jerky.. Or if you need an extra 1/2 inch or so of clearance.

Toker · January 20, 2012, 04:29:27 PM

But for those who add them let's say (Scott's Place way) it will make them a bit harder to add because the wood template doesn't fit anymore with the new racks supports.

mlp311 · January 20, 2012, 04:45:11 PM

Toker, I didn't have a problem with getting the site to accept my serial number. Everything worked fine.

Sent from my DROID3 using Tapatalk

Toker · January 20, 2012, 05:07:15 PM

THX i did the same. Was not working yesterday when i tweeted them. They must have fixed it.

New Bradley Smoker

squirtthecat