E1 error when cold smoking.

[St. Alfonzo]

I just got a Bradley smoker. When cold smoking, how do I eliminate the "E1 beeping error", since the unit is too far away to plug the sensor in? Forgive me if I missed the answer in another post. I haven't come across this specific problem.

[Habanero Smoker]

Hi St. Alfonzo;

Welcome to the forum.

If you are handy with a soldering iron, you can make a By-Pass Plug. The directions are included in the link below.

Bradley Digital By-Pass Plug

Or you can buy two 2.1mm x 5.5mm x 9.5mm DC Plugs, get the necessary length of wire the same gauge as your Bradley sensor, and solder a plug on each end of the wire. That way you can plug your homemade sensor wire into the generator to the cabinet.

Or if you are not handy with a soldering iron, you can also purchase the bypass plug directly from Bradley, by email, but in these days of the pandemic, that may take awhile.

[TedEbear]

Yard & Pool also sells the bypass plug.

Bradley Cold Smoke Adapter Bypass Plug

[St. Alfonzo]

Thank you for the information. I think I can scrounge enough parts to make something work.