E1 error when cold smoking.

Started by St. Alfonzo, March 24, 2021, 07:37:14 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

St. Alfonzo

I just got a Bradley smoker. When cold smoking, how do I eliminate the "E1 beeping error", since the unit is too far away to plug the sensor in? Forgive me if I missed the answer in another post. I haven't come across this specific problem.

Habanero Smoker

Hi St. Alfonzo;

Welcome to the forum.

If you are handy with a soldering iron, you can make a By-Pass Plug. The directions are included in the link below.

Bradley Digital By-Pass Plug

Or you can buy two 2.1mm x 5.5mm x 9.5mm DC Plugs, get the necessary length of wire the same gauge as your Bradley sensor, and solder a plug on each end of the wire. That way you can plug your homemade sensor wire into the generator to the cabinet.

Or if you are not handy with a soldering iron, you can also purchase the bypass plug directly from Bradley, by email, but in these days of the pandemic, that may take awhile.



     I
         don't
                   inhale.
  ::)

TedEbear


St. Alfonzo

Thank you for the information. I think I can scrounge enough parts to make something work.